TT1833DHC Series Filter Element

TTI’s PowerGuardTM Filter line is produced in the USA using USA and German materials. TTI has leveraged 58 years of filter manufacturing expertise of FG Industrial Filtration (formerly Mahle) to deliver the PowerGuardTM product line to the North American marketplace. TTI’s Dual Phase Microglass media provides wold class filtration performance. The Dual Phase technology provides Beta 1000 efficiencies with a built-in pre-filter layer to extend filter life and reduce initial pressure drops.

Dual Phase Filtration

Delivers superior filtration efficiency and dirt holding capacity with a low pressure drop.

Close up image of TTI's Dual Phase Microglass Media. Including arrows that highlight both the pre-filter phase and final retentive phase. The pre-filter phase provides high dirt holding capacity for capturing larger particulates in fluids, extending the life of the filter element. The final retentive phase has fine denier fibers that provide high efficiency polishing to remove the finest particulates.

Performance

  • 3000 PSID collapse pressure
  • 50 PSID change out recommended
  • 250°F (121°C) maximum operating temperature
TTI PNLength (inches)Micron Rating β1000Media TypeSeal Type
TT1833DHC50 = 5.421(Omit) = Dual Phase Microglass*
*Standard Option
B = Buna
70 = 9.963WA = Water AbsorptiveV = Viton
100 = 15.756SD = Static Dissipative
10
25
Part Number Example: TT1833DHC-50-3V = TT1833DHC (50 length, 3 micron, viton seal type)